بررسی تجربی اثر توزیع کننده گاز و ارتفاع مایع بر ماندگی گاز در راکتورهای حبابی

چکیده

ماندگی گاز یکی از عوامل مهم برای پیشگویی رفتار هیدرودینامیکی در راکتورهای حبابی است. از عوامل مؤثر بر ماندگی گاز، نوع توزیع کننده گاز و ارتفاع ستون مایع است.
 در این تحقیق از یک ستون استوانه‌ای به قطر cm 15 و مجهز به دو نوع توزیع کننده گاز، استفاده و اثر توزیع کننده گاز و ارتفاع ستون مایع در سرعت‌های متفاوت گاز بررسی شدند. نتایج آزمایش‌ها نشان می‌دهد که، افزایش ارتفاع ستون مایع و کاهش قطر منافذ توزیع کننده گاز، باعث افزایش ماندگی کلی گاز در سیستم می‌شود.
 

کلیدواژه‌ها


عنوان مقاله [English]

Experimental Study of Sparger Type and Liquid Height on Gas Hold-up in Bubble Column Reactor

چکیده [English]

Gas hold up in bubble column reactors is one of the important parameter to predict hydrodynamic behavior in bubble column reactors.
Since sparger type and liquid height have important effect on total gas hold up, In this study a cylindrical bubble column with 15 cm diameter which has equipped with 2 type sparger is used to study the effect of sparger type and liquid height at different superficial gas velocity on total gas hold up. The results show that increasing liquid height and decreasing sparger hole diameter increase the gas hold up.
 

کلیدواژه‌ها [English]

  • Bubble Column
  • Gas Sparger
  • Gas Hold Up
[1] W. Deckwer, Bubble Column Reactor, 4th Ed. John Wiley and Sons, Chichester, 1992.
[2] M.H. Oyevaar, R. Bos, K.R. Westerterp, Interfacial Areas and Gas Hold-Ups in Gas-Liquid Contactors at Elevated Pressures from 0.1 to 8.0 Mpa, Chemical Engineering Science, Vol. 46, 1991.
[3] I.G. Reilly, D.S. Scott, T.J.W. de Bruijn, and D. MacIntyre, The Role of Gas Phase Momentum in Determining Gas Holdup and Hydrodynamic Flow Regimes in Bubble Column Operations,  The Canadian Journal of Chemical Engineering, Vol. 72, 1994.
[4] J.S. Smith, L.F. Burns, K.T. Valsaraj, L.J. Thibodeaux, Bubble Column Reactors for Wastewater Treatment. 2. The Effect of Sparger Design on Sublation Column Hydrodynamic in the Homogeneous Flow Regime, Industrial and Engineering Chemistry Research, Vol. 35, 1996.
[5] Ch. Vial, R. Laine, S. Poncin, N. Midoux, G. Wild, Influence of Gas Distribution and Regime Transition on Liquid Velocity and Turbulence in a 3-D Bubble Column, Chemical Engineering Science, Vol. 56, 2001.
[6] S.C. Saxena, Z.D. Chen, Hydrodynamics and Heat Transfer of Baffled and Un baffled Slurry Bubble Column, Rev. Chem. Eng., Vol. 10, 1994.
[7] P.M. Wilkinson, A.P. Spek, L. van Dierendonck, Design Parameters Estimation for Scale-Up of High-Pressure Bubble Columns, AIChE Journal, Vol. 38, 1992.
[8] B.N. Thorat, K. Kataria, A.V. Kulkarni, J.B. Joshi, Pressure Drop Studies in Bubble Columns,” Industrial and Engineering Chemistry Research, Vol. 40, 2001.
[9] L.Z. Pino, R.B. Solari, S. Siquier, L. Antonio Estevez, M. Yepez, Effect of
Operating Conditions on Gas Holdup in Slurry Bubble Columns with a Foaming Liquid, Chemical Engineering Communication, Vol. 117, 1992.
[10] F. Kastanek, J. Zahradnik, J. Kratochvil, J. Cermak, Modeling of Large-Scale Bubble Column Reactors for Non-Ideal Gas–Liquid Systems, 2 nd Ed, L. K. Doraiswamy, 1997.
[11] F. Mashelkar, Frontier in Chemical Reaction Engineering, 2nd Ed, John Wiley & Sons, New Delhi, India, Vol. 1, 1984.
[12] A. Mersmann, Design and Scale-up of Bubble and Spray Columns, Ger. Chem. Eng. Vol. 1, 1978.