[1] Fewel Jr, K, Kean J A (1992) Computer modeling aids separator retrofit, Oil and Gas Journal, (United States), 90: 27.##
[2] Wilkinson D, Waldie B (1994) CFD and experimental studies of fluid and particle flow in horizontal primary separators, Chemical Engineering Research and Design, 72, 2: 189-196. ##
[3] Wilkinson D, Waldie B, Nor M M, Lee H Y (2000) Baffle plate configurations to enhance separation in horizontal primary separators, Chemical Engineering Journal, 77, 3: 221-226. ##
[4] Qaroot Y F (2013) Simulation of three-phase separator performance, The Petroleum Institute (United Arab Emirates). ##
[5] Hansen E W, Celius H K, Hafskjold B (1995) Fluid flow and separation mechanisms in offshore separation equipment, International Symposium On Two-Phase Flow Modelling and Experimentation. ##
[6] Laleh A P, Svrcek W Y, Monnery W D (2012) Design and CFD studies of multiphase separators—a review, The Canadian Journal of Chemical Engineering, 90, 6: 1547-1561. ##
[7] Ghaffarkhah A, Shahrabi M A, Moraveji M K, Eslami H (2017) "Application of CFD for designing conventional three phase oilfield separator, Egyptian Journal of Petroleum 26, 2: 413-420. ##
[8] Acharya T, Casimiro L (2020) Evaluation of flow characteristics in an onshore horizontal separator using computational fluid dynamics, Journal of Ocean Engineering and Science, 5, 3: 261-268. ##
[9] Ahmed T, Russell P A, Hamad F, Gooneratne S (2019) Experimental analysis and computational-fluid-dynamics modeling of pilot-scale three-phase separators, SPE Production and Operations 34, 04: 805-819. ##
[10] Frank M, Kamenicky R, Drikakis D, Thomas L, Ledin H, Wood T (2019) Multiphase flow effects in a horizontal oil and gas separator, Energies, 12, 11: 2116. ##
[11] Ghaffarkhah A, Dijvejin Z A, Shahrabi M A, Moraveji M K, Mostofi M (2019) Coupling of CFD and semiempirical methods for designing three-phase condensate separator: case study and experimental validation, Journal of Petroleum Exploration and Production Technology, 9, 1: 353-382. ##
[12]. Fadaei M, Ameri M J, Rafiei Y, Ghorbanpour K (2021) A modified semi-empirical correlation for designing two-phase separators, Journal of Petroleum Science and Engineering, 205: 108782. ##
[13]. Manual F (2005) Manual and user guide of Fluent Software, Fluent Inc 597. ##
[14]. Fadaei M, Ameli F, Hashemabadi S H (2019) Experimental Study and CFD Simulation of Two-phase Flow Measurement Using Orifice Flow Meter. ##
[15] Khan J R (2013) Comparison between discrete phase model and multiphase model for wet compression, Turbo Expo: Power for Land, Sea, and Air, American Society of Mechanical Engineers. ##
[16] Kuang S, Qi Z, Yu A B, Vince A, Barnett G D, Barnett P J (2014) CFD modeling and analysis of the multiphase flow and performance of dense medium cyclones, Minerals Engineering 62: 43-54. ##
[17 Padoin N, Dal’Toé A T, Rangel L P, Ropelato K, Soares C (2014) Heat and mass transfer modeling for multicomponent multiphase flow with CFD, International Journal of Heat and Mass Transfer, 73: 239-249. ##
[18] Demuth H B, Beale M H, De Jess O, Hagan M T (2014) Neural network design, Martin Hagan. ##
[19] Hagan M T, Menhaj M B (1994) Training feedforward networks with the Marquardt algorithm, IEEE transactions on Neural Networks, 5, 6: 989-993. ##
[21] Sajja P S (2021) Introduction to artificial intelligence, Illustrated Computational Intelligence, Springer, 1-25. ##
[22] Patel A R, Ramaiya K K, Bhatia C V, Shah H N, Bhavsar S N (2021) Artificial intelligence: prospect in mechanical engineering field—a review, Data Science and Intelligent Applications, 267-282. ##
[23] Shoghl S N, Naderifar A, Farhadi F, Pazuki G (2021) Optimization of separator internals design using CFD modeling in the Joule-Thomson process, Journal of Natural Gas Science and Engineering, 89: 103889. ##
)