[1]. Washburn E W (1921) Note on a method of determining the distribution of pore sizes in a porous material.Proceedings of the National academy of Sciences of the United States of America, 7: 115–116.##
[2]. Swanson B F (1981) A simple correlation between permeabilities and mercury capillary pressures. Journal of Petroleum Technology, 33, 12: 2498–2504. ##
[3]. Pittman E D (1992) Relationship of porosity and permeability to various parameters derived from mercury injection-capillary pressure curves for sandstone, AAPG Bulletin, 76. 2:191–198. ##
[4]. Dastidar R, Sondergeld C H Rai CS (2007) An Improved empirical permeability estimator from mercury injection for tight clastic rocks, Petrophysics, 48, 3: 186–190. ##
[5]. Kolodize S (1980) Analysis of pore throat size and use of the Waxman-Smits equation to determine OOIP in spindle field. 55th Society of Petroleum Engineering Annual Technical Conference and Exhibition, Colorado, The USA. 9382-9386. ##
[6]. Hagiwara T (1986) Archie’s “m” for permeability, The Log Analyst, 27, 1: 39–42. ##
[7]. Katz A J, Thompson A H (1987) Uantitative prediction of permeability in porous rock, Physical review B, 34. 11: 8179–8181.
[8]. Gueguen Y, Palciausakas V (2006) Introduction to the physics of rocks, 1st edition, Princeton University Press, Princeton, 1-127. ##
[9]. Kesten H (2006) What is percolation?. Notices of the American Mathematical Society, 53, 5: 572–573. ##
[10]. Glover P W J, Zadjali I I, Frew K A (2006) Permeability prediction from MICP and NMR data using an electrokinatic approach, Geophysics, 71, 4: 49–60. ##
[11]. Nooruddin H, Enamul H, Al- Yousef H, Okasha T (2016) Improvement of permeability models using large mercury injection capillary pressure data set for middle east carbonate reservoir, Journal of Porous Media, 19, 5: 405–422. ##
[12]. Huet C, Rushing J, Newsham K E, Blasingame T A (2005) A Modified Purcell model for estimating absolute permeability from mercury injection capillary pressure data, The 2005 International Technology Conference, Doha, Qatar. ##
[13]. Nooruddin H, Al-Yousef H, Okasha T (2014) Comparison of permeability Models using mercury injection capillary pressure data on carbonate rock samples, Journal of Petroleum Science and Engineering, 121: 9-22. ##
[14]. U.S. Energy Information Administration (2021), Iran Hydrocarbon’ Fields. https://www.eia.gov/international/analysis/country/IRN/background, July 16. ##
[15]. Al-Husseini M I (2000) Origin of the Arabian plate structures: Amar collision and Najd Rift, GeoArabia. 5##: 27–542.
[16]. Szabo F., Kheradpir A (1978) Permian and Triassic stratigraphy, zagros basin, south-west Iran, Journal of Petroleum Geology, 1. 2: 57-82. ##
[17]. Alsharhan A S (2006) Sedimentological character and hydrocarbon parameters of the middle Permian to early Triassic Khuff formation, The United Arab Emirates, GeoArabia, 11, 3: 121–158. ##
[18]. Konert G, Afifi A M, Al-Hajri S A, Drost H J (2001) Paleozoic stratigraphy and hydrocarbon habitat of the Arabian plate, GeoArabia, 6, 3: 407–442. ##
[19]. Tavakoli V., Rahimpour-Bonab H. and Esrafili-Dizaji B (2011) Diagenetic controlled reservoir quality of South Pars gas field, an integrated approach, Geoscience Journal, 343: 55-71. ##
[20]. Rahimpour-Bonab H, Asadi-Eskandar A, Sonei R (2009) Effects of the Permian–Triassic boundary on reservoir characteristics of the South Pars gas field, Persian Gulf Geology Journal, 44, 3: 341-364. ##
[21]. Moradpour M, Zamani Z, Moallemi S A (2008) Controls on reservoir quality in the lower Triassic Kangan formation, southern Persian Gulf, Journal of Petroleum Geolgy, 31, 4: 367-386. ##
[22]. Tavakoli V, Jamalian A (2018) Microporosity evolution in Iranian reservoirs, Dalan and Dariyan formations, the central Persian Gulf, Journal of Petroleum Science and Engineering, 52: 155 -165. ##
)